Profile Cylinders

Door Handles : Locks/Latches : Profile Cylinders

Because of the vast amount of different length cylinders it is not practical to list them all so we have listed the size that is suitable for a standard 45mm door but please enquire about any other sizes through our contact form.

If there is anything you require that cannot be found on our website then please contact us as we can supply all makes of door handles and ironmongery at our usual low cost and remember when comparing prices VAT is included in all our prices.

Click on image for larger view.

Double Oval Profile Cylinders
Size & Finish:
Quantity: 
Oval profile cylinders 70mm and 80mm long suitable for standard 45mm doors.

Available in Brass (PB) and Satin Chrome (SC) Finishes


15 Pin Euro Cylinder By Eurospec
Type and Finish:
Quantity: 
Eurospec Patented 15pin Euro cylinder.

Patented to 2022 and "Secure by Design"

BSEN1303

FD30/60

Probably the most secure cylinder available, anti drill anti snap design and registered keying ensures that only the holder of the registration card supplied with this cylinder is able to obtain extra keys.

Available in Polished Chrome (PC), Satin Chrome (SC) or Polished Brass (PB).


Half Oval Profile Cylinders
Type & Finish:
Quantity: 
Half Oval profile cylinders 40mm long suitable for standard 45mm doors.

Available in Brass (PB) and Satin Chrome (SC) Finishes


Double Euro Profile Cylinders
Size & Finish:
Quantity: 
Euro profile cylinders 70mm and 80mm long suitable for standard 45mm doors.

Available in Brass (PB) and Satin Chrome (SC) Finishes


Half Euro Profile Cylinders
Type & Finish:
Quantity: 
Half Euro profile cylinders 40mm long suitable for standard 45mm doors.

Available in Brass (PB) and Satin Chrome (SC) Finishes


Euro Profile Thumbturn Cylinders
Size & Finish:
Quantity: 
Euro profile thumbturn cylinders 70mm and 80mm long suitable for standard 45mm doors.

Available in Brass (PB) and Satin Chrome (SC) Finishes


Oval Profile Thumbturn Cylinders
Size & Finish:
Quantity: 
Oval profile thumbturn cylinders 70mm and 80mm long suitable for standard 45mm doors.

Available in Brass (PB) and Satin Chrome (SC) Finishes



Click and Shop

The Handle Shop
BAS Ironworks Road, Barrow-in-Furness, Cumbria, LA14 2PG
Tel: +44 (0)1229 836464  Fax: +44 (0)1229 870231
e-mail: sales@thehandleshop.co.uk


Terms & Conditions